Thunder Scientific Corporation - Humidity Generation and Calibration Equipment NVLAP - Code 200582-0

Contact Us:

Toll Free: (800) 872-7728
Phone: (505) 265-8701
FAX: (505) 266-6203

 

E-mail:

sales@thunderscientific.com
support@thunderscientific.com
info@thunderscientific.com


Model ACS-517B Air Compressor System

Model ACS-517B

Air Compressor System

A Fully Enclosed Compressed Air Supply with Dryer & Sound Muffling Cabinet

 

FEATURES

  • 175 psiG Oil-Less Air Supply
  • Dry Air To <-40 °C Ambient Pressure Dew Point
  • Sound level <70 db
  • Vibration Isolated Compressor
  • Membrane Air Dryer
  • Pre-Filter with Venting Water Trap
  • 25’ Air Hose Extension
  • On/Off Circuit Breaker Switch
  • 10’ Removable AC Power Cord
  • Hour Meter
  • Indoor Use Only
  • Dimensions L 29” x W 17” x H 13”
  • Cabinet Weight Approximately 100 Lbs.

DESCRIPTION

The ACS-517B is used with a Model 2500 and will fit on the bottom shelf of the 2500 mobile cart. This is a fully enclosed compressed air supply with an air dryer and sound muffling cabinet. This system is ideal for in Lab use because the sound level is less than 70 decibels. The Model ACS-517B has a hose hold down on top for ease of storage.

 

PRINCIPLE OF OPERATION

To provide the Model 2500 Humidity Generator with a clean, dry air supply and to give the laboratory a noise level that's acceptable for the lab technicians to carry on with their calibrations.

Model ACS-517B Dimensions
Dimensional Schematic of the ACS-517B Air Compressor System.

 

 

SPECIFICATIONS

This 1/2 HP ACS-517B has an oil-less air supply and can run with a continuous pressure of 175 psi with a maximum ambient air temperature of 40 °C at a continuous duty of 6,000 hours before a minor maintenance service kit is required.

 

UTILITIES

You can receive the ACS-517B system in ether 120V~ 60Hz and 7.5A or 200-240V~ 50Hz and 5A depending on your needs.

 

ORDERING INFORMATION

When ordering a new air compressor system, part number ACS-517B, you will receive a 25 foot air hose extension, a ten foot removable AC power cord, and the enclosure with an air compressor. If you already have a Model 2500 humidity generator with a compressor, and you only need to order the enclosure, specify part number ACE. In addition, you will need to specify your power requirements by adding a -R for regular domestic power of 120V, or if high voltage is needed then specify a -H for the 220V unit. If you need to order a compressor only, specify part number GH517B.

 

UPGRADES/OPTIONS

On the older Air Compressor Systems we have an hour meter upgrade available.

 

Back to Top

THUNDER SCIENTIFIC CORPORATION

623 WYOMING BLVD. S.E. • ALBUQUERQUE, NM 87123-3198
Toll Free: (800) 872-7728 • Phone: (505) 265-8701 • FAX: (505) 266-6203
E-mail: sales@thunderscientific.com | support@thunderscientific.com | info@thunderscientific.com